Magicinfo Pro Videowall

  • 6 Replies
  • 5576 Views

0 Members and 1 Guest are viewing this topic.

*

Offline killi

  • Newbie
  • *
  • 7
  • 0
Magicinfo Pro Videowall
« on: April 22, 2010, 02:06:17 PM »
Hi there

i am trying to build an videowall with two 460uxn displays. the videowall is configured and every displays has its
position. when i publish the schedule nothing happens on the screens.
only the screensaver is displayed on the screens.

can anybody help me pls ?

*

Offline EricL

  • Moderator
  • SuperHero & MegaGuru
  • *****
  • 294
  • 41
Re: Magicinfo Pro Videowall
« Reply #1 on: April 22, 2010, 02:32:10 PM »
Check the published schedule file on the client D: drive (SScheduler.scl) and check the dates that the screens should be showing content and the correct paths are correct.

EricL

*

Offline killi

  • Newbie
  • *
  • 7
  • 0
Re: Magicinfo Pro Videowall
« Reply #2 on: April 22, 2010, 03:28:54 PM »
thx for your answer. i found the problem. the time on the client was wrong and the time on the server was shown correct oO.

*

Offline EricL

  • Moderator
  • SuperHero & MegaGuru
  • *****
  • 294
  • 41
Re: Magicinfo Pro Videowall
« Reply #3 on: April 22, 2010, 03:30:23 PM »
Nice one :-)

Glad you got it working!

EricL

*

Offline killi

  • Newbie
  • *
  • 7
  • 0
Re: Magicinfo Pro Videowall
« Reply #4 on: April 22, 2010, 03:40:44 PM »
i thought i can trust the time that was displayed on the server software :-)

*

Offline EricL

  • Moderator
  • SuperHero & MegaGuru
  • *****
  • 294
  • 41
Re: Magicinfo Pro Videowall
« Reply #5 on: April 22, 2010, 04:20:44 PM »
If you mean the time shown in the remote management part of the the server interface it relates to the separate clock the system uses to wake up and shut down, as you are probably aware it is not the same as the computer clock used by the pc.

EricL

*

Offline Bill Coral

  • SuperHero & MegaGuru
  • ******
  • 379
  • 87
Re: Magicinfo Pro Videowall
« Reply #6 on: April 23, 2010, 07:26:06 PM »
EricL is quite right. Some people set both settings, ie on the OSD they put in a Time and activate the ON and OFF period, and others do it though MagicInfo pro.

You cannot mix them!

The panel is 'independent' from embedded PC in that the MagicInfo pro server looks after it, but the panel through the OSD will ignore it as it has not intelligence to communicate directly wit the Windows Time (naturally).

So you need to decide what you want, but cannot ave both.

Bill