MAGICINFO DIGITAL SIGNAGE SUPPORT FORUM

Digital Information Displays (Digital Signage) => MagicInfo-I Premium => Topic started by: AppliedBS on July 16, 2014, 01:16:26 PM

Title: MagicInfo Premium and embedding Samsung SNP-5200H IP Network Camera
Post by: AppliedBS on July 16, 2014, 01:16:26 PM: Hi,

I've currently setup magic info premium and I am using the Samsung iPolis software to control my IP camera.

I would like to know how I can embed the camera footage only onto my slides.

Kind Regards
Dan
Title: Re: MagicInfo Premium and embedding Samsung SNP-5200H IP Network Camera
Post by: 460FPN2 on July 21, 2014, 02:58:59 PM: i believe i have done this by using the video element. insert the element, click cancel to avoid choosing a video. look at the properties of the element, see the MMS section- here you will put the IP/port of the camera such as http://192.168.0.100:8080
Title: Re: MagicInfo Premium and embedding Samsung SNP-5200H IP Network Camera
Post by: AppliedBS on July 21, 2014, 04:10:43 PM: Hi thank you for your reply I have tried this with no luck the camera I am using is a Samsung SNP-5200H I don't know if this will help but it is also protected by a username and password.
Title: Re: MagicInfo Premium and embedding Samsung SNP-5200H IP Network Camera
Post by: 460FPN2 on July 21, 2014, 04:48:08 PM: oh. it probably won't work if the stream is protected. I don't know anything about that camera, just IP videos streams in general.