MAGICINFO DIGITAL SIGNAGE SUPPORT FORUM
Digital Information Displays (Digital Signage) => MagicInfo Lite => Topic started by: onric on February 11, 2015, 01:48:13 PM
-
Hi there,
I encountered a small problem within our Monitor System.
-The Server is using Server v2 2005.1
-The Monitors are using NA-MISEPLV-1000.54
-Monitors are connected via LAN
We're using 7 LITE_ME46C and 1 LITE_PE46C.
I've set up timers for the monitors to boot up and shut down and start with the Magic Info Lite program and a playlist.
Now, the 7 ME Monitors are doing fine but the PE is giving me headaches.
It starts into MagicInfo but only shows the start picture with the MI logo (those cubicles forming a cubicle). But it is being recognized as connected by the system from the beginning. I can manually start MI without problems via webgui anytime.
Any idea what could be wrong?
-
For anybody suffering from the same problem:
In the TV settings change the primary boot order to DVI and the secondary to MagicInfo Lite.
I never encountered that problem anymore