MAGICINFO DIGITAL SIGNAGE SUPPORT FORUM

Digital Information Displays (Digital Signage) => MagicInfo-I => Topic started by: killi on March 30, 2010, 10:31:11 AM

Title: Slideshow doesn't work
Post by: killi on March 30, 2010, 10:31:11 AM
Hi

I have a problem with the content manager and slideshows. When i set a slideshow on the server
and publish it, the displays shows only the first pic from the slideshow and the other content isn't
playing.

The Videowall is configured and works fine only the slideshoe doesn't run.
Title: Re: Slideshow doesn't work
Post by: zee on May 17, 2010, 01:29:43 PM
you must  Convet slide show to the video format,
 I convert the slide show and send with video in  the videowall it works well
Title: Re: Slideshow doesn't work
Post by: Bill Coral on May 23, 2010, 07:28:07 AM
This is a common mistake. You need to set the timing transitions. Have you done this and if you have, can you tells us how?

Bill
Title: Re: Slideshow doesn't work
Post by: mooooooo on May 29, 2010, 05:21:58 PM
Hi

I am newer for setting video wall, does any know how can I feed in a scroll text message to the wall, it seems no such option to select.  And how can I play the movie from the set top box via the hdmi into the wall.  Thanks for help in advance.

moooo
Title: Re: Slideshow doesn't work
Post by: Bill Coral on June 03, 2010, 07:50:30 AM
Setting up a video wall is not difficult. But you can only play a slide show (photos) or video. There is nothing else the screens they can do in that configuration. You cannot have scrolling RSS feeds etc. If you want to have this felixibility, you will then use a donor screen, organise a schedule with the appropriate template, get a VGA splitter across all the screens and set them as appropriate. Ask your dealer. They should be able to help you.

Bill
Title: Re: Slideshow doesn't work
Post by: mooooooo on June 04, 2010, 05:36:59 AM
How? May I know the steps?