MAGICINFO DIGITAL SIGNAGE SUPPORT FORUM
Digital Information Displays (Digital Signage) => MagicInfo => Topic started by: mrmrva on June 02, 2010, 11:57:37 PM
-
We have a 3x3 460UxN video wall. What I would like to know is would it be possible and how, to stream TV signal from PC, cable TV... to this wall. Is there some splitter with this number of connectors or is there some other solution?
Thanks
-
The only way to do this, is to get a Freeview Box or a Satellite Receiver onto an HDMI splitter (provided the Freeview Box or the Satellite Receiver has HDMI output) and then distributed across all screens. Then you can use the MDC software (or the Remote Controller) and get the screens to:
1) Understand that they are on a 3 x 3 Video Wall
2) What position they are within the Video Wall
That's all.
Bill
-
Bill thanks for answering.
I did some research and think that these two could do the job:
http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=474&check=f
http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10104&cs_id=1010405&p_id=4086&seq=1&format=1#largeimage