DIGITAL SIGNAGE SUPPORT
Digital Information Displays (Digital Signage) => MagicInfo => Topic started by: killi on April 22, 2010, 02:06:17 PM
-
Hi there
i am trying to build an videowall with two 460uxn displays. the videowall is configured and every displays has its
position. when i publish the schedule nothing happens on the screens.
only the screensaver is displayed on the screens.
can anybody help me pls ?
-
Check the published schedule file on the client D: drive (SScheduler.scl) and check the dates that the screens should be showing content and the correct paths are correct.
EricL
-
thx for your answer. i found the problem. the time on the client was wrong and the time on the server was shown correct oO.
-
Nice one :-)
Glad you got it working!
EricL
-
i thought i can trust the time that was displayed on the server software :-)
-
If you mean the time shown in the remote management part of the the server interface it relates to the separate clock the system uses to wake up and shut down, as you are probably aware it is not the same as the computer clock used by the pc.
EricL
-
EricL is quite right. Some people set both settings, ie on the OSD they put in a Time and activate the ON and OFF period, and others do it though MagicInfo pro.
You cannot mix them!
The panel is 'independent' from embedded PC in that the MagicInfo pro server looks after it, but the panel through the OSD will ignore it as it has not intelligence to communicate directly wit the Windows Time (naturally).
So you need to decide what you want, but cannot ave both.
Bill