How to loop images continously ?

  • 1 Replies
  • 1656 Views

0 Members and 2 Guests are viewing this topic.

*

Offline mrafeeq

  • Newbie
  • *
  • 1
  • 0
How to loop images continously ?
« on: September 07, 2015, 01:57:38 PM »
Hi All,

I have made a template in which half the screen plays a video and half the screen I want to loop around 8 pictures. Each pic is shown for 20 secs and after the 8th pic, it becomes black and it is not going back to 1st pic. I tried with "Loop" option and "Repeat until the designated time". Both stops at the 8th pic.

I am using MagicInfo Author Version 3.1,
Samsung DM48D Screen with in built S2 player.

Please help.

Regards,
Rafeeq

DIGITAL SIGNAGE HELP AND SUPPORT

How to loop images continously ?
« on: September 07, 2015, 01:57:38 PM »

*

Offline NovaVisual

  • Major Guru
  • **
  • 27
  • 2
Re: How to loop images continously ?
« Reply #1 on: May 31, 2016, 08:51:54 PM »
It looks like your repetition cycle may be the issue. It looks like you are telling each image to repeat every 20 seconds.  If you have 8 images at 20 seconds, your repetition cycle should be 20sec x 8 = 160 sec.  Or 00:01:40.  Try that, see if that's the issue.  Your start times seem to be good (pic 1 = 0, 2 = 20 sec, 3 = 40sec etc).  You may just be piling up too many pictures simultaneously repeating.